Learning how to turn on iPhone 6s is the essential first step for new users or anyone who has recently updated their iOS software. The process is designed to be intuitive, requiring minimal physical interaction while introducing you to the core interface. This device, released several years ago, remains a capable machine when powered up correctly, and understanding the initial startup sequence gives you confidence with the entire ecosystem. This guide walks you through every method and detail to ensure your iPhone 6s springs to life without issue.
Preparing Your iPhone 6s for Startup
Before pressing any buttons, it is wise to check the physical condition of your device to ensure a smooth activation. A common reason an iPhone appears dead is simply a lack of power, so verifying the battery status is the logical first move. You should also confirm that the device is not physically damaged, particularly around the power button, which is the primary hardware switch for turning the phone on. Taking a moment to inspect the charging port for debris can save you time if the unit is low on battery and needs to recharge before booting up.
Check the battery indicator or connect the device to a power source.
Ensure the phone is not in a protective case that might be jamming the power button.
Verify that the device has not been exposed to moisture or extreme temperatures.
Confirm that the screen is not damaged, as this provides visual feedback during startup.
Using the Side Button to Power On
The most direct method of turning on your iPhone 6s involves using the side button, which is also referred to as the sleep/wake button. This hardware component is located on the right edge of the phone and is responsible for controlling the power state. Pressing this button initiates the boot sequence, and holding it down sends a specific command to the operating system to wake the device from sleep or start it up from a complete shutdown. You do not need to be an expert; you simply need to apply the right amount of pressure for the right duration.
The Correct Pressing Technique
To activate the phone, you should press and hold the side button located on the right side of the device. It is important to press the button firmly into the chassis rather than just tapping it, as the internal switch requires physical compression to register. You will see the Apple logo appear on the screen if the command is accepted, indicating that the process has begun. Releasing the button at this stage is acceptable, as the phone will continue the startup sequence on its own without your input.
Troubleshooting a Non-Responsive Screen
If the screen remains dark after holding the button for several seconds, do not panic. This scenario usually indicates that the battery is completely drained and requires charging before the software can initiate. Plug the device into a power outlet using the Lightning cable that came with the phone, being sure to connect it securely to both the phone and the adapter. During the charging process, you might see a lightning bolt icon appear next to the battery indicator, which confirms that the unit is receiving power and will eventually boot up.
